|
Propane Regulator Valve , Hose Assembly
Sturgis brand propane gas regulator for
high pressure propane tank regulation . Preset (10 psi or 20 psi) or Adjustable
pressure regulators (0-20 psi is the norm or 0-30 psi or 0-60 psi for
circumstances where higher gas volumes are required).
Outdoor high heat cookers
most often use high pressure propane from tanks which require a high
pressure regulator. Gas grills up to about 50,000 btu/hr
most often use low pressure propane which require a low pressure propane
regulator. Low
pressure can be natural gas,or propane piped into a trailer home or RV,
or a conventional home in
which the gas has already been adjusted to a very low pressure at the
propane source.
Preset low pressure propane regulators are set at 6 ounces.
Natural gas pressure in most areas is 10 ounces and does not require a
regulator of this sort. All prices INCLUDE shipping. {Handy
conversions: 1" WC = 0.036127 psi , 16 oz. = 1 pound} |
Model # |
Thumbnails
We ship everywhere in the world...and
the shipping is free to the 48 contiguous US states. |
Price |
|
Propane Regulator Combo
Assembly consists of a 10 psi PRESET high pressure propane
regulator, a POL propane tank fitting, and a five foot x 1/4"ID UL approved hose.
Suitable for outdoor cooking appliances such as cast iron burners or
cookers. Weight 5#. Free shipping. (ref #106227-60) |
COM1 |
 |
37.95
|
|
Propane Regulator Combo
Assembly consists of a 10 psi PRESET high pressure propane regulator, a POL
propane tank fitting, a UL approved ball valve for positive shut off, and a five foot
x 1/4"ID UL approved hose. Suitable for outdoor
cooking appliances such as cast iron burners or cookers. Weight 5#.
Free shipping. |
COM1-UL |
 |
42.95
|
|
Propane Regulator Combo
Assembly consists of an
ADJUSTABLE (0-20 psi) high pressure propane regulator, a POL propane
tank fitting, and five foot x
1/4"ID UL approved hose. Suitable for outdoor cooking
equipment such as cast iron burners or cookers. Weight 5#. Free
shipping.
(ref# 106233-60)
Note: We
will install any of the Sturgis Gas Quick Connect hose assemblies on any of our
gas regulators by request. Purchase the
Gas Quick Connect assembly
of your choice and add a note in the COMMENTS section (when filling out
the credit card information) that you want it installed on your regulator.
(This regulator is
also available with a pressure gauge which helps you dial
in repeatable settings. See
COMRI-20 below.) |
COM2 |
 |
34.95
|
|
Propane Regulator Combo
Assembly consists of an ADJUSTABLE (0-30
psi) high pressure propane regulator, a POL propane tank fitting, and
five foot x 1/4"ID
UL approved hose. Suitable for outdoor cooking equipment such as cast
iron burners or cookers where more gas flow is required than usual.
Weight 5#. Free shipping. (ref #106232-60) Also available with a pressure
gauge. This helps you dial in repeatable settings. See
COMRI-30. Also available with the convenient Red Acme model 204077
wrench-less tank connector shown further down on this page. |
COM2-30 |
 |
45.95
|
|
Propane Regulator Combo
Assembly consists of an ADJUSTABLE (0-60
psi) high pressure propane regulator, a POL propane tank fitting, and
five foot x 1/4"ID
UL approved hose. Suitable for outdoor cooking equipment such as cast
iron burners or cookers where more gas flow is required than usual.
Weight 5#. Free shipping. (ref# 106229-60) Also available with a pressure
gauge. This helps you dial in repeatable settings. See COMRI-60.
Also available with the convenient Red Acme model 204077 wrench-less
tank connector shown further down on this page. |
COM2-60 |
 |
50.95
|
|
Propane Regulator Combo
Assembly consists of a 20 psi PRESET high pressure propane regulator, a POL
propane tank fitting, a fine adjustment NEEDLE VALVE, and a five foot x
1/4"ID
UL approved hose. Suitable for outdoor cooking equipment such as a cast iron
burner or cookers. Weight 5#. Free shipping. (ref
#106125-60) |
COM3 |
 |
39.95
|
|
Propane Regulator Assembly for Weed Burners
. Consists of an adjustable high pressure propane
regulator, POL propane tank fitting, and a ten foot hose. This is the
COM#2 high pressure propane setup but with a longer 10 foot hose perfect
for use with all outdoor propane weed burners or instances when you
simply need a longer hose for a cast iron burner. Weight 6# Free
shipping. (ref# 106233-120) |
COMW |
 |
44.95
|
|
Propane Regulator Duo Combo Consists
of COM#1 20 psi PRESET high pressure propane regulator assembly with TWO needle
valves and TWO UL approved five foot
x 1/4"ID
hoses. Weight 8#. Free shipping.
(ref#106206-60-60) |
COM4-D |
 |
56.95
|
|
Cart Combo Hose Assembly Propane
Regulator Combo for Propane Camp Stove Burner Cart
Assembly consists of a 10 psi PRESET
high pressure propane regulator, POL propane tank fitting, and a 16"
x 1/4"ID
hose which has been custom designed for the Propane Camp Stove Burner
Cart. Weight 5#. Free shipping. |
COMCH |
 |
28.95
|
Propane 20 PSI Regulator & Pressure Gauge Assembly
consists of a (0- 20 psi) ADJUSTABLE high pressure propane regulator assembly, POL propane tank
fitting, and with a pressure gauge and five foot
x 1/4"ID UL approved hose. Perfect for
adjusting the pressure flow to a repeatable setting. Weight 6#, Free
shipping. (ref#106231-60)
|
COMRI-20 |
 |
50.95
|
|
Propane 30 PSI Regulator & Pressure Gauge Assembly
consists of a (0-30 psi) ADJUSTABLE high pressure propane regulator assembly, POL propane tank
fitting, and with a pressure gauge and five foot
x 1/4"ID UL approved hose. Perfect for
adjusting the pressure flow to a Repeatable setting. Weight 6#, Free
shipping. (ref#106223-60)
Also available with the convenient
Red Acme model 204077 wrench-less tank connector shown further down on
this page. |
COMRI-30 |
 |
54.95
|
|
Propane 60 PSI Regulator & Pressure Gauge Assembly
consists of a (0-60 psi) ADJUSTABLE high pressure propane regulator assembly, POL propane tank
fitting, and with a pressure gauge and five foot
x 1/4"ID UL approved hose. Perfect for
adjusting the pressure flow to a Repeatable setting. Weight 6#, Free
shipping. (ref#106224-60)
Also available with the convenient
Red Acme model 204077 wrench-less tank connector shown further down on
this page. |
COMRI-60 |
|
59.95
|
| Green ACME
Inlet Fitting
Type 1 Green ACME appliance
fitting is a wrench-less, user friendly, right hand connector with
excess flow and a thermally sensitive sleeve. 1 5/16" ACME x 1/4"
M NPT. 200,000 btu/hr maximum output capacity. Designed for
all high pressure propane regulators up to 30 psi. For use on
large volume gas grills over 65,000 btu/hr. Not for use with
equipment requiring low pressure. Order one and we will install it
on the regulator you order. No installation charges. Pictured below,
for example, is a Green ACME inlet fitting installed on a COM#3
regulator assembly. Weight 1#. Free shipping.
Acme fittings make changing out empty
tanks easy! |
204039 |
 |
12.00
|
| Red ACME
Inlet Fitting
Type 1 Red ACME appliance fitting
is a wrench-less, user friendly, right hand connector with excess flow
and a thermally sensitive sleeve. 1 5/16" x 1/4" M NPT. 500,000
btu/hr maximum output capacity.
Designed for the 0-60 psi adjustable high pressure propane regulators.
Not for use on smaller gas grills and other low pressure devices.
Order one and we will install it on
the regulator you order. No installation charges.
Pictured below, for example, is a Red ACME inlet fitting
installed on a COMRI-60 (0-60 psi) regulator assembly. Weight 1#. Free shipping.
Acme inlet fittings are wrench-less! |
204077 |
 |
12.00
|
!
Do you need a longer propane High Pressure Hose (1/4" ID)
on the gas regulator you are ordering?
We can change out the standard 5' propane 1/4" ID high pressure Black hose
for a longer 10', 15', or 20' hose. The charge is: $10 (10'), $20 (15'), or
$30 (20'). Select your choice below:
!
Do you want a high pressure quick connect
hose installed on the gas regulator you are ordering?
Select the length of quick connect hose
to be installed on the
regulator in place of the standard 5' hose. Each hose combo assembly below comes with one 9" pigtail
which should be attached permanently to your appliance.
Additional pigtails for other appliances are available at
Gas Quick Connect
. See examples of how this quick connect hose assembly works
with a high pressure regulator:
   
Connect the QD socket
and PT9 pigtail together and the propane gas flows. Disconnect
the QD socket and PT9 pigtail and the propane gas is automatically shut off.
Very handy when you have several appliances and only one tank.
!
Do you need a longer Low Pressure AGA Hose
(3/8" ID) for one of the COM5 series of Low Pressure Regulators you are
ordering in
the low pressure regulator section below? We can change out the standard 5' low pressure
3/8" ID GREY AGA hose to a 10', 12', 15', or 20' length. The
charge is: $15 (10'), $21 (12'), $30 (15'), or $45 (20'). Select your
choice below:
|
|
Low Pressure Propane Regulators are used to
reduce the pressure to about 6 ounces. Most low btu/hr gas appliances
require low pressure. Check with the appliance manufacturer to determine the
working gas pressure needed. Our Low Pressure Regulators come with 3/8" ID
outlets and are supplied with 3/8" ID UL (Underwriters Laboratories) and
AGA (American Gas Association) approved hoses to insure maximum
gas flow. 100,000 btu/hr maximum output. |
| Low
Pressure
Regulator Assembly
consists of a POL fitting, low pressure
PRESET regulator (which reduces the tank pressure to about 6 ounces, 10.5 "
WC), and a five foot,
3/8" ID UL
approved AGA hose with swivel connection. Weight 5#. Free shipping.
(ref #106251-60) |
COM5 |
 |
35.95
|
| Low
Pressure
Regulator Assembly
consists of a POL fitting, low pressure
PRESET regulator (which reduces the tank pressure to about 6 ounces, 10.5 "
WC), UL approved ball valve
for positive shut off, and a five foot 3/8" ID UL approved AGA hose with swivel
connection. Weight 5#.
Free shipping. |
COM5-UL |
 |
43.95
|
| Low
Pressure
Regulator Duo Combo
consists of a POL fitting, low pressure
PRESET regulator (which reduces the tank pressure to about 6 ounces, 10.5 "
WC), two needle valves for
control of gas through each hose, and two five foot 3/8" ID UL approved AGA hoses.
Weight 5#. Free shipping. |
COM5-D |
 |
59.95
|
| Black ACME
Inlet Low Pressure Fitting
Type 1 Black ACME
low pressure appliance fitting is a
wrench-less, user friendly, right hand connector with excess flow and a
thermally sensitive sleeve. 1 5/16" ACME x 1/4" M NPT.
100,000 btu/hr maximum output capacity
designed for low pressure propane regulators (our COM#5 series,
hoses, and other fittings. Perfect for use with most gas grills and
other low pressure devices.
Order one and we will install it on
the regulator you order. No installation charges.
Pictured below, for
example, is a Black ACME inlet installed on a COM#5 regulator assembly. Weight 1#. Free shipping.
Acme fittings make changing out empty tanks
easy! |
204024 |
 |
12.00
|
|
Propane Pal
The Propane Pal is a unique new grill accessory that continuously shows you
how much propane is in your tank. Call it what you want: propane level
indicator, propane fuel gauge, propane bottle gage: it works! An indicator at
the front tells you the level of fuel in the tank. When you put the full
tank on, the tank sits down on the bottom with a "full" reading on the
Propane Pal. As the fuel is used, the tank slowly rises (tank gets lighter).
When it reaches the top, the indicator on the Propane Pal tells you to refill
or change the tank. 14 to 21 day shipping time
direct from factory in Canada. Weight 5# Free shipping
 |
PROPAL |
 |
34.95 |
