Tejas Smokers Barbecue Pits Texas Tradition  

Home

Brass Fittings,Valves

Camp Stove Carts

Cast Iron Burners

Charcoal Grills

 

Cooker Stands

Crab/Hi-Heat Cookers

Generator Hose

High Pres. Regulators

Low Pres. Regulators

Hot Plates

Jet Burners

Natural Gas Hose 

Pit Accessories

Quick Connect Hose

 

 

Replacement Parts

Smoker Pits

Utensils

Weed Burners

Closeouts

Hot Plates, Fryer Accessories  Compare the heat outputs and compare the weights to competitive units.  These hot plates are Sturdy and Built to Last!  Grease filter rack and filters are available.  Hot plates ordered for Natural Gas use will not need a regulator but if a 1/2"ID natural gas hose is used with the hot plate some brass fitting adapters may be needed (see Brass Fittings, Valves ).   Free shipping to the 48 contiguous U.S. States.

Single Burner Hot Plate The HP1H is for use with high pressure propane.  This hot plate features sturdy 1" angle iron legs, a large 15.5" x 15.5" angle iron table top with eight heavy duty spokes, a 4" diameter burner head, wind screen, and a 10" cooking height.  The HP1H works well for many cooking applications other than just turkey frying. An optional 8" high-model WG1 folding WIND guard is available for the model HP1 series hot plates.  The optional WING side table extensions also work with this outdoor hot plate.  We recommend the use of a COM#1 preset high pressure gas regulator with this series of hot plates.  The HP1H (for high pressure propane) will output a maximum of 160,000 btu/hr. It is also available with a 40,000 btu/hr low pressure burner which we can modify for low pressure propane or natural gas use, as shown below.   Choose your version at the right.  Both versions come standard with a Needle Control Valve on the burner.  Weight 18#.  Free shipping.

160,000 btu/hr high pres. burner Single burner hot plate with high pressure propane burnerHP1H cooker shown with a 160,000  high btu/hr HP1H comes standard with a Needle Control Valve      

40,000 btu/hr low pressure burner  Single burner hot plate which we can modify for low pressure propane OR natural gas useHP1 with a low pressure burner (choose propane OR natural gas)HP1L comes standard with a Needle Control Valve

All of our hot plates are well constructed, sturdy, and built to last.

HP1 High pressure propane cast burner can be used as a Turkey Fryer Cooker  

97.95

Dual Burner Hot Plate  This dual burner Hot Plate is normally outfitted with high pressure cast burners (160,000 btu/hr), as pictured at the right, but can also be ordered with 40,000 btu/hr low pressure cast burners or 40,000 btu/hr natural gas burners.  The top burner surface dimensions are 14" x 28" x 10" tall.  The carrying handle adds an additional 3.5" to the front to rear depth. This hot plate series uses the WG2 dual burner folding Wind Guard (pictured at right).  The convenient carrying handle in front also serves as added protection for the gas manifold and needle valve controls during transport.  We recommend use of a COM#1 high pressure gas regulator with this hot plate.  For low pressure propane we recommend use of a COM#5 preset regulator.  Natural gas version available by request at the same price.  A natural gas hose is not included in this price, but is available.   Weight 33#.   Free shipping.

160,000 btu/hr high pressure burner Top view of dual burner high pressure hot plateFront view of dual burner high pressure hot plate

 40,000 btu/hr low pressure burner   Top view of dual burner low pressure hot plateFront view of dual burner low pressure hot plate

HP2 Dual burner cooker stand shown with optional wind guard shown here with optional WG2 wind guard 189.95

Triple Burner Hot Plate   Like the dual burner above, this triple burner Hot Plate series is normally outfitted with high pressure cast burners (160,000 btu/hr), as pictured at the right, but can also be ordered with 40,000 btu/hr low pressure cast burners or 40,000 btu/hr natural gas burners.  The dimensions are 14" x 42" x 10" tall.   The carrying handle adds an additional 3.5" to the front to rear depth.The HP3 series hot plates can use the optional WG3 triple burner Wind Guard (pictured at right).  The convenient carrying handle in front also serves as added protection for the gas manifold and needle valve controls during transport.  We recommend use of a COM#1 high pressure gas regulator with this unit.  For low pressure propane we recommend use of a COM#5 preset regulator.  Natural gas version available by request at the same price.  A natural gas hose is not included in this price, but is available.  Weight 42 #  Free shipping

160,000 btu/hr high pressure burner Top view of triple burner hot plate with high pressure propane cast burners

40,000 btu/hr low pressure burner    Triple burner hot plate with 40,000 btu/hr cast burnersFront view of triple burner low pressure (40,000 btu/hr) hot plate

HP3 Triple burner high heat hot plate shown with optional wind guard

shown here with optional WG3 wind guard

 

289.95

Heavy Duty Steel Griddles A griddle is the perfect addition to one of our cooker stands or hot plates. Cook hamburgers, bacon, sausage, eggs, hash browns, tortillas, fajitas, steaks, pork chops, pancakes, or anything else that is cooked on a griddle. Griddles comes with removable grease trap for cleaning & storage. The grease trap has square ends and will stand on a flat surface. Three sizes are available.

  • Small griddle measures 14 1/2" x 14 1/2" and weighs 22# and is designed to sit on top of a single burner cooker stand or a hot plate.
  • Medium size griddle measures 14 1/2" x 22 1/2" and weighs 31# and is designed to sit on top of a double burner cooker stand or a hot plate.
  • Large griddle measures 14 1/2" x 30 1/2" and weighs 45# and is designed to sit on top of a triple burner cooker stand or a hot plate.

The pictures demonstrate the Medium size griddle placed on the top of our two burner cooker stand (a cooker stand or hot plate is not included with a GRIDDLE purchase).  Free Shipping.

Griddle grease tray

GRIDDLE Steel Griddle
Propane Regulator Combo  Assembly consists of an adjustable high pressure propane regulator, a POL propane tank fitting, and five foot hose.  Suitable for use with a turkey fryer,  our high heat crab cooker, or other outdoor cooking equipment .  Weight 5# Free shipping. COM2  0-20 psi adjustable propane regulator 34.95
Propane Regulator Combo  Assembly consists of an ADJUSTABLE (0-30 psi) high pressure propane regulator, a POL propane tank fitting, and five foot UL approved hose.  Suitable for outdoor cooking equipment such as cast iron burners or cookers where more gas flow is required than usual.  Weight 5#.  Free shipping COM2-30 Propane Regulator 45.95
Wok Ring -  Large Size Steel Ring   The diameter is 11 inches and the height is 2 inches.   Choose the size Wok Ring suitable for your Wok and purchase it with any hot plate (or cooker stand).  We will notch out groves in the radiating spokes in your cooker stand cooking surface so that the Wok Ring will seat into the spokes of your hot plate whenever you choose to use your Wok.  No extra charge.  Please note that notching a Wok ring must be done for each specific Hot Plate or  Cooker Stand.  We cannot guarantee notching a Wok Ring will fit a Hot Plate or Cooker Stand that has already been shipped out.  Weight 3#   Free shipping RING1 Wide diameter Wok Ring 24.95
Wok Ring -  Deep Sized Steel Ring   The diameter is 9 inches and the height is 3 inches.  Choose the size Wok Ring suitable for your Wok and purchase it with any hot plate (or cooker stand).  We will notch out groves in the radiating spokes in your hot plate cooking surface so that the Wok Ring will seat into the spokes of your hot plate whenever you choose to use your Wok.  No extra charge.  Please note that notching a Wok ring must be done for each specific Hot Plate or  Cooker Stand.  We cannot guarantee notching a Wok Ring will fit a Hot Plate or Cooker Stand that has already been shipped out.  Weight 4#.   Free shipping RING2 Deep Wok Ring 24.95
Hot Plate with 10" diameter burner For use with low pressure propane.  We recommend use of a COM#5-UL low pressure gas regulator with the HP10L.  The natural gas version (HP10N) is also available.  Cooker is similar to above HP1 series hot plate but with the 10" diameter LPCAST10 low pressure burner.  This sturdy setup will output a maximum of 100,000 btu/hr.  The LPCAST10 burner is also pictured in the LC12 cooker at the bottom of this page. This Hot Plate comes standard with a Needle Control Valve as pictured on the single burner below.  Dimensions are 15.5" x 15.5" x 10"  Weight 33#.  Free shipping.  

Optional folding wind guard shown below:

100,000 btu/hr low pressure burner Optional WG1 wind guard installed on HP10 series hot plateOptional WG1 wind guard folded and leaning on front of HP10 series hot plateThe LPCAST10 burner in this hot plate comes standard with a Needle Control Valve

HP10 HP10 series hot plate 172.95
Low Pressure Cooker Unit   Low pressure cooker which works with low pressure propane (or natural gas by request).   The burner can produce up to 100,000 BTU/hr.   Sturdy base ringed by 1/2" tubing.  Dimensions are 16" wide x 12" tall.  We recommend use of a COM#5-UL low pressure gas regulator with this unit if the source of fuel is propane directly from a portable tank.  This cooker unit comes standard with a Needle Control Valve as pictured on the single burner below.  Weight 26#     Free shipping 

The LC12 series cookers come standard with a Needle Control Valve

LC12 Low Pressure Cooker 129.95

Wind Guard - 8" high walls  -  For a Single Burner HP1 series hot plates or HP10 series hot plates choose a WG1 wind guard.  For a Double Burner HP2 choose a WG2 wind guard.  For a Triple Burner HP3 hot plate choose a WG3 wind guard.  These guards are made with 16 gauge sheet metal with a 1" angle iron support and is 8" tall. The ends are hinged with heavy duty hinges and may be folded for storage or travel.  The picture shown at right is of the WG1 WIND GUARD installed on a model CS1H Single burner cooker stand (which is not included).  WIND GUARDS make cooking outdoors easier in high wind conditions.  Weight 12#.  Free shipping.

WG1 wind guard on HP1H hot plateWG2 on a dual burner hot plateWG3 on a triple burner hot plateWG1 single burner wind guard, WG2 dual burner wind guard, WG3 triple burner wind guard

WG WG1 wind guard installed on a CS1H cooker stand 56.95

Grease Filter Rack  - Fried food will taste better and the cooking oil will last longer if the grease is filtered after each use in the turkey fryer cooker.  Filtering the grease is absolutely necessary if oil is to be stored after use.  Pot pictured not included.  Weight 5#   Free shipping.

Turkey Fryer Grease Filter RackGrease Filter on RackGrease Filter on Rack and Pot

FRACK Turkey Fryer Grease Filter Rack 22.95
Grease Filters  -  Box of 50 filters.  Weight 2#   Free shipping. FILTERS Grease Filters 21.95

Home  |   About Tejas  Barbecue Recipes  |  Contact Us  |   Make Payment   |   Pit Instructions   |   Resources       Smoke Ring   |   Tejas Dealers    |   Tejas Tips          Warranty-Privacy-Terms of Service-Returns    |   International Shipments

         JustAddCommerce (the secure shopping cart used on this site) has the highest level of encryption available today through XRamp/SecureTrust, passing an extensive validation process to guarantee security for customers, protecting their sensitive information when they order from this site.

We can manually process PayPal orders. Call 713 222 0077

Check Order Status
Order Number:
Billing Email:

...another web design by
DonDulin.com

1993-2014 Tejas Smokers
all rights reserved