Tejas Smokers Barbecue Pits Texas Tradition  

Home

Brass Fittings,Valves

Camp Stove Carts

Cast Iron Burners

Charcoal Grills

 

Cooker Stands

Crab/Hi-Heat Cookers

Generator Hose

High Pres. Regulators

Low Pres. Regulators

Hot Plates

Jet Burners

Natural Gas Hose 

Pit Accessories

Quick Connect Hose

 

 

Replacement Parts

Smoker Pits

Utensils

Weed Burners

Closeouts

                      BBQ Pit & BBQ Grill Accessories      

Stainless steel springs , stainless steel spring handle assemblies , rib racks, ash pans, temperature gauges , vinyl covers , cooking grates , neoprene gloves , ash rake , drunken chicken stands ...we have it all!   Barbecue pit accessories for your Texas smoker pit or barbecue grill .  Tejas Smokers pays the shipping* for accessories within the 48 contiguous U.S. states.   Freight on barbecue pits is by quotation.

 

BBQ Pit & Grill Accessories

shipping is free within the 48 contiguous US states

Drunken Chicken Stand 100% Stainless Steel Construction - Rounded edges, no sharp corners - Dishwasher safe and easy to clean - Stainless steel tube holds marinade inside the chicken while cooking.  You get an incredibly juicy chicken which was continually basted from within during the cooking on your barbecue pit.  Works with an infinite variety of simple marinades (beer, coca cola, apple juice) or more complex marinade recipes.  Complete instructions for use are included.  Can be used in a conventional oven, barbecue pit smoker, or over a direct flame.  Perfectly sized for chickens:  6" base, 5" high tube.  Type 202 stainless steel construction. Shipping weight 1# 4 oz. Free shipping.            free chicken stand recipes

 Drunken Chicken Stand

2220


Drunken Chicken Stand

includes shipping

18.95
Rib Rack - 100% Stainless Steel, Commercial Grade Construction, and Dishwasher Safe  -  Sturdy construction to hold 4 large slabs of ribs securely when lifting in and out of your barbecue pit.  Rib rack has generous 3" vertical spacings allow an unrestricted flow of hot smoke and permit adequate, un-crowded room to baste the ribs.  Approximate 20 degree angle, 5mm (greater than 3/16" thick) support arms which is  the thickest and strongest rib rack we have ever seen in the marketplace.   Designed so that the ribs touch a minimum of the rib rack.   Swing away handles for easy lifting.  These superior rib racks are awesome and unequaled!  Every barbecue pit deserves some.  Type 202 stainless steel wire construction. LWH 12" x 9.5" x 6".  Weight. 1# 14 oz.  Free shipping. 2215

Stainless Steel Rib Rack with Swing Away Handles

Don't squeeze your ribs close together...let them see the smoke and have room for basting!.  This rack solves that problem.

29.95

 

Temperature resistant neoprene-coated, insulated gloves These insulated gloves are temperature resistant to 250°F and are FDA approved for handling food.  Use of these lined gloves instead of tongs and forks will keep you from poking holes and scarring the meats and thereby risk losing juices while smoking.  Size 10...comfortably fits a large hand. Not for use in a direct flame. Shipping weight 1 #  Free shipping. 9022

Temperature Resistant Neoprene Gloves

29.95
7 1/2" stainless sauce bowl & swivel arm
fits all charcoal grills and barbecue pit smokers except the model 2430.  Shipping weight  2 #. 
1401

Sauce Bowl

17.95

Tejas Smokers® Stainless steel temperature gauge
This is our custom made stainless steel temperature gauge. It is well-made and will give you years of trouble-free use on your barbecue pit smoker. Threads are 1/2" normal pipe thread.  The dial face is 3".  The temperature probe is 2 1/2".  Displays 50° to 550°F.  Two gauges are required for "CC" models with vertical smoking chambers. 
Shipping weight 1 #  Free shipping.
1402

27.95

Ashcroft® Stainless steel temperature gauges
Ashcroft has been making high quality stainless steel temperature gauges for many years.   We stock them in four different stem lengths:    2 1/2", 4", 6", and 9".   Threads are 1/2" normal pipe thread.  The dial face is 3".    Displays 50° to 550°F.   
Shipping weight 1 #  Free shipping.

The 9" unit is out of stock until the middle of February.

Ashcroft gauge with 2.5 inch stem lengthAschroft gauge with 4 inch stem lengthAshcroft gauge with 6 inch stem lengthAshcroft gauge with 9 inch stem length

 

APIT Ashcroft 3" Dial Face

BBQ black hi-temp spray paint
This is a high temperature silicone-based paint. Anyone who purchases a Tejas Smoker pit product should own a can of this paint so that nicks and scratches can be addressed right away. Wt. 1# 1oz.  Free shipping.
1403

10.95

Cast Iron Fish Fryer Combo Side Burner  This is the model 1500 cast iron  burner with a Needle Control Valve installed on the burner.   This unit easily attaches over the welded handle assembly of any Tejas Smokers barbecue pit or grill and fits many other popular smoker pits or grills with similar handle designs.  Pic below shows the burner with needle control valve. Natural gas version available. Heat output is 160,000 btu.  Weight 14#.  Free shipping.

High pressure burner with Needle Valve Control       

Pictures below demonstrate use of an OPTIONAL Quick Connect/Disconnect gas hose and pigtail with the fish fryer unit.

quick connect gas hose connected to fish fryerquick connect gas hose disconnected from fish fryer

1500

Fish Fryer

Quick connect fittings, custom hose lengths, and wrench-less Acme type I tank connectors are available for the gas regulators.

97.50

Cast Iron Fish Fryer Combo Side Burner  This is the model 1500 cast iron  burner and includes the COM#1 five foot LPG gas hose, POL fitting, and preset regulator (shown below).  A Needle Control Valve installed on the burner is included. This unit easily attaches over the welded handle assembly of any Tejas Smokers barbecue pit or grill and fits many other popular smoker pits or grills with similar handle designs.  Pics below show the burner with needle control valve and the propane pressure regulator.  Natural gas version available. Heat output is 160,000 btu.  Weight 17#.  Free shipping.

fish fryer burner on a model 1628 smoker pitfish fryer burner on a model 2430 combo smoker pitCOM#1 - 10 psi preset regulator with 5 ft hose

1503

Fish Fryer
 

129.50

Brass drain valve
The 1 1/4" brass drain valve has a quarter-turn stainless steel ball in the valve. Use of this valve keeps you from getting grease and water on your hand when you open up the drain pipe on your barbecue pit during clean-up.  It is hard to move fast enough to beat gravity.  Get one!.  Free shipping.
1501

24.00

Log lighter pipe / gas assist with brass adapter (to fit a LPG hose) The LPG gas log lighter pipe will save you a half hour every time you start your logs. Simply turn on the gas from your propane tank and light the log lighter, wait a few minutes, and the logs are in flames.  This procedure also eliminates the need for using charcoal and smelly charcoal lighter fluid. The natural gas version is available at the same price by request.  This unit also works well as a gas assist for maintaining a constant temperature in a pit when you don't want to use wood logs or charcoal.  A relatively small flame will maintain the pit at 225 degrees (or higher).  The log lighter pipe itself, not including the cast iron venturi (gas/air mixing chamber) is 16 1/4" long.  Measuring from the end of the venturi closest to the pipe, there is 4 1/4" of just pipe before the first hole.  Then a series of  holes continue for 10 1/2".  Measuring from the last hole there is 1 1/2" of just pipe to the end of the unit.  It all adds up to 16 1/4" of pipe length.  The venturi (gas/air mixing chamber) is 3 1/4" long.  The entire log lighter is 18 1/2" long.  To be used with a COM#2 or COM#3 high pressure regulator.  Wt.  1 # 11 oz.  Free shipping. 1504

Log Lighter Pipe

Quick connect fittings and hoses and wrench-less Acme type I tank connectors are available for the gas regulators.

20.00

CLICK HERE FOR A HOT TIP!

CLICK THE STAR
FOR MORE  INFO

Log lighter / gas assist complete assembly (LPG)
Same as Above PLUS a COM#3 high pressure regulator  with a 5' hose, needle valve, holding clamp, with brass adapter to make the UL approved hose fit the log lighter pipe.  To install the log lighter simply unscrew the 1/2" threaded plug at the rear of the firebox and slide the log lighter pipe into the firebox.  You can use the bar clamp to hold the log lighter in place permanently or simply let it fit loose and pull it out after the wood starts.  Be sure to replace the 1/2" plug when you remove the log lighter. Longer hoses and quick connect hoses are available by request.  Weight 5#.  Free shipping.
1502

Log Lighter Assembly

56.95

Ash Rake/Cleaning Tool - Works with any barbecue pit smoker or grill.  Comes as standard equipment in all Tejas pits and grills. 1509

Ash Rake and Cleaning Tool

16.95

Steel ash pan for series 1628 series smokers - 3/16" plate steel   These heavy duty ash pans  save time in cleaning up the firebox of your barbecue pit. Smooth, curved corners. Pan is installed at the very bottom of the firebox.  Place a second ash pan upside down in the top position inside the firebox to be used as a combination griddle surface and heat deflector.  Highly recommended to help you keep paint on your firebox lid.   Click the Yellow Star at the right for details   16" x 16 3/4" x 1 1/4", Weight 17#.  Free shipping on all bbq pit accessories, of course. 1516

ash pan
Above: used as an ash pan
Below:  
used as a lid
baffle or griddle

 Lid Baffle

50.00

CLICK THE STAR
FOR  INFO

CLICK HERE A HOT TIP
Steel ash pan for series 2040 series smokers - 3/16" plate steel   Ash pans save time in cleaning up the firebox.   They also are great to use (upside down) as a griddle cooking surface and a heat deflector to protect the firebox lid from overheating and flaking off paint....click the Yellow Star at left and read about that.  Smooth, curved corners.  18" x 19" x 1 1/4",  Weight 22#. 1520

Ash Pan
Above: used as an ash pan
Below:   used as a lid baffle
or griddle

Lid baffle

60.00

CLICK HERE A HOT TIP

CLICK THE STAR
FOR MORE  INFO

Steel ash pan for series 2442 smokers - 3/16" plate steel   Ash pans save time in cleaning up the firebox.   They also are great to use (upside down) as a griddle cooking surface and a heat deflector to protect the firebox lid from overheating and flaking off paint....click the Yellow Star at left and read about that.  Smooth, curved corners.  23" x 23" x 1",  Weight 31#. 1524

Ash Pan
Above: used as an ash pan
Below:   used as a lid baffle
or griddle

Lid baffle

75.00

CLICK HERE A HOT TIP

CLICK THE STAR
FOR MORE  INFO

Stainless steel shelf cover for 1628 series pits 12" x 24"   These beautiful 304 stainless steel shelf covers add a great touch to a barbecue pit smoker. Made of high quality brushed stainless steel, they are attached to the existing shelf with four stainless steel pop rivets. A stainless steel shelf cover can be added to any of our barbecue pit smokers at any time. Supplied with four 3/16" stainless steel pop rivets.  When ordered with a pit the self cover will be installed by us.

 1628 series brushed stainless steel shelf cover with four stainless steel rivets

1624

Stainless Steel Shelf Cover

75.00

Stainless steel shelf cover for 2040 series pits 12" x 36"   These beautiful 304 stainless steel shelf covers add a great touch to a barbecue pit smoker. Made of high quality brushed stainless steel, they are attached to the existing shelf with four stainless steel pop rivets. A stainless steel shelf cover can be added to any of our smoker pits at any time. Supplied with four 3/16" stainless steel pop rivets. When ordered with a pit the shelf cover will be installed by us.

2040 series brushed stainless steel shelf cover with four stainless steel rivets

2036

Stainless Steel Shelf Cover

95.00

Premium Heavy Duty Fitted Covers are now available for all Tejas pits and grills.  These special heavier weight covers are truly water resistant and have a smooth interior lining.  They are constructed out of a grey color outdoor spa covering material and have a flexible feel like that of a heavy weight Naugahyde.  Prices for all covers include shipping within the continental U.S.  All of the covers listed below are for Tejas Smokers' model pits. They are custom made for us and will not fit any other manufacturers' pits or grills.
Premium Heavy Duty Fitted Vinyl Cover for Tejas model 1628 smoker pit.  This Premium cover is truly water resistant and has a smooth interior lining. Constructed out of a grey color outdoor spa covering material and has a flexible feel like that of a heavy weight Naugahyde.  Weight 5# 9oz.

All covers have a metal grommet in the front and rear of the cover so that a bungee type cord could be run under the pit or grill to hold the cover in place even during very high winds:

.    All covers are shipped free within the continental U.S.

71628

96.00
Premium Heavy Duty Fitted Vinyl Cover for Tejas model 1628CC smoker pit.  This Premium cover is truly water resistant and has a smooth interior lining. Constructed out of a grey color outdoor spa covering material and has a flexible feel like that of a heavy weight Naugahyde.  Weight 8# 4oz. 71628CC

148.00
Premium Heavy Duty Fitted Vinyl Cover for Tejas model 2040 series smoker pit.  This Premium cover is truly water resistant and has a smooth interior lining. Constructed out of a grey color outdoor spa covering material and has a flexible feel like that of a heavy weight Naugahyde.  Weight 7# 12oz. 72040

130.00
Premium Heavy Duty Fitted Vinyl Cover for Tejas model 2040CC series barbecue pit smoker .  This Premium cover is truly water resistant and has a smooth interior lining.  Constructed out of a grey color outdoor spa covering material and has a flexible feel like that of a heavy weight Naugahyde.   Weight 10# 8oz.

72040CC

165.00
Premium Heavy Duty Fitted Vinyl Cover for Tejas model 2442 series smoker pit.  This Premium cover is truly water resistant and has a smooth interior lining. Constructed out of a grey color outdoor spa covering material and has a flexible feel like that of a heavy weight Naugahyde.  Weight 11# 72442

165.00

Premium Heavy Duty Fitted Vinyl Cover for Tejas model 2430 bbq smoker pit.  This Premium cover is truly water resistant and has a smooth interior lining. Constructed out of a grey color outdoor spa covering material and has a flexible feel like that of a heavy weight Naugahyde.  Weight 6# 11oz. 72430

96.00
Premium Heavy Duty Fitted Vinyl Cover for Tejas model 2436XL barbecue grill .  This Premium cover is truly water resistant and has a smooth interior lining.  Constructed out of a grey color outdoor spa covering material and has a flexible feel like that of a heavy weight Naugahyde.  Weight 6# 9oz.

72436XL

117.00
Premium Heavy Duty Fitted Vinyl Cover for Tejas model 2454XL barbecue grill .  This Premium cover is truly water resistant and has a smooth interior lining.  Constructed out of a grey color outdoor spa covering material and has a flexible feel like that of a heavy weight Naugahyde.  Weight  8# 2oz. 72454XL

130.00
Charcoal Grate Fork  to lift expanded metal cooking grates.  Weight 10 oz. Free shipping.  Tired of picking up that messy cooking grate with your hands?  This Charcoal Grate Fork solves that problem.

 Charcoal ForkCharcoal Fork

1510

16.95
Fire Poker  move those logs around, pull them back or push them where you want them... Weight  12 oz.  Free shipping. 1512 16.95
4' Chimney Extension   Fits all Tejas models.  Can be used separately or in combination with the existing smokestack assemblies on all Tejas barbecue pit smokers . Use of a taller chimney will increase the draft rate of the barbecue pit.  Simply choke down the air supply at the firebox to compensate for the increased draft rate. This is a great way to direct the smoke up, up and away from your patio and your barbecue pit..  Adds 48" of height.   Weight 30#.   Free shipping.

Chimney ExtensionChimney Extension

1548

4 foot chimney extension
Free shipping.

149.95
Tejas Smokers Cap   Embroidered with the Tejas Smokers logo.  Color: Black.  One size fits all. Weight 1#.  Free shipping. BLKCAP Tejas Embroidered Cap 19.95
Tejas Smokers Lighted Cap with L.E.D. lights   Embroidered with the Tejas Smokers logo.  Color: Black.  One size fits all.  Easy to reach On/Off slide switch on rear band.  Ultra bright L.E.D. technology with long-life batteries.  Uses 2 coin type 3 volt CR-2032 batteries (included)  This cap is ideal for bbq chefs working late into the evening.  Home, automotive, outdoors, or ANY low light situation.  Provides exceptionally bright hands-free light. It is amazing just how much light these L.E.D. bulbs put out.  Includes instructions and warranty. Patented.  Weight 1#.  Free shipping.

Tejas LED Cap with lights onTejas LED CapTejas LED Cap - rear view showing on/off switch

LEDCAP Tejas LED Cap 28.95
Tejas Smokers Chefs Apron   Every Tejas Smokers pit chef needs their own Chefs Apron.  Our custom apron is embroidered with the Tejas Smokers logo.  This unique apron is completely adjustable at the neck and waist to fit almost anyone.  You can shorten the collar length by pulling on the waist strap at the right hand side of the apron.  Weight 1 #.  Free shipping. APRON 28.95
Tejas Smokers BBQ Tools Apron  This collection has it all:  an embroidered apron, chef's cap, chef's glove, and all the bbq tools.  It even has a pocket to hold your favorite beverage.  A great gift for the weekend chef.  Weight 6#  Free Shipping APRON2 35.95
Push Nut Cap - Push nut cap for installation of any of our stainless steel springs on 1/2" steel rod. To install just hit the cap with a hammer.  Great for at the firebox or vertical chamber doors of a barbecue pit smoker .  Free shipping. SCAP Stainless Steel Push Nut Cap 1.50
4 1/2" Stainless Steel Spring (1/2" core) All Tejas pits and grills already have these stainless steel springs as handles, but they are great to replace worn-out/rusted handles on other bbq smoker pits or when building a custom barbecue pit .  You can even add a stainless steel spring to a firebox door handle or the vertical chamber door by using a push nut cap. These stainless steel springs are constructed of Type 302 stainless steel wire and measure 4 1/2" in length. Wt. 5oz. Free shipping  Examples of  possible uses of a stainless spring with a push nut cap are shown here: 

 

1508

Stainless Steel Spring
Free shipping.

9.00
6" Stainless Steel Spring (1/2" core) These longer stainless steel springs measure six inches in length. Constructed of Type 302 stainless steel wire. Perfect for building custom pits and grills.  6" x 1 1/2", wt. 6 oz.              1511 Six Inch Stainless Steel Spring
Free shipping
12.50
Stainless Steel Spring Handle, Complete Assembly For folks who are building or upgrading their own barbecue pit smokers . These are the same threaded stainless steel spring handle assemblies that we use on all Tejas Smokers barbecue pits and barbecue grills.  Posts are on 5 1/2" centers.  Handle assembly is a threaded 1/2" diameter carbon steel rod with a Type 302 stainless steel spring and it  will install on 1/8", 3/16", 1/4", and even 3/8" thick doors and lids. 3 1/2" high x 6" wide with threaded posts on 5 1/2" centers.  Standard 3/8"-16 hex nuts are included.  Threaded posts fit inside a 3/8" hole.  Wt. 1#.  Free Shipping 1507

Stainless Steel Spring Handle
Free shipping

24.50

Home  |   About Tejas  Barbecue Recipes  |  Contact Us  |   Make Payment   |   Pit Instructions   |   Resources       Smoke Ring   |   Tejas Dealers    |   Tejas Tips          Warranty-Privacy-Terms of Service-Returns    |   International Shipments

         JustAddCommerce (the secure shopping cart used on this site) has the highest level of encryption available today through XRamp/SecureTrust, passing an extensive validation process to guarantee security for customers, protecting their sensitive information when they order from this site.

We can manually process PayPal orders. Call 713 222 0077

Check Order Status
Order Number:
Billing Email: